Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
HeatShield Chimney Cleaning in Greeley, CO
We provide independent HeatShield service across Greeley, from crown repair to cast-in-place liner work, and we’re not affiliated with the manufacturer. The thing that makes our HeatShield work in Greeley different: we start with a Level 2 camera inspection of your original clay tile before quoting any HeatShield product, because in this city’s older homes the liner is often the original one. Our technicians have up to 13 years of experience, handle the full inspection-to-repair cycle themselves, and use HeatShield products as they’re formulated to be used. Call (855) 632-3564 to book a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Why Greeley Residents Choose Us for HeatShield Service
We work in chimneys only, and HeatShield is one of the product lines we know from the inside out. That matters in Greeley, where a lot of chimneys have never had a modern cast-in-place system installed and where the weather punishes anything that wasn’t cured or prepped correctly. We aren’t a general handyman company that also sweeps chimneys. Every job is inspection, sweep, and repair from the same specialists, so nobody hands your chimney off to a third party midway through.
When we quote HeatShield work in Greeley, we use quality parts that fit the formulation. HeatShield products are proprietary, and cure and adhesion behavior depend on using the right materials for that system. We also keep a close eye on the details that fail first here: how a crown was prepped, whether a flashing seal is still bonded to the masonry, whether the cap is doing its job. If a spot repair will do, we say so. If it won’t, we tell you why and show you the camera evidence. Scheduling is straightforward: you get a clear window, a written estimate, and a price set per job. Call (855) 632-3564 to set up a visit.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Common HeatShield Chimney Cleaning Problems We Solve in Greeley
- Hairline cracking in HeatShield crown coatings after freeze-thaw cycles. Greeley swings between freeze and thaw repeatedly through late winter and spring, and a thin crack in a crown coating is enough for water to get behind it and reach the masonry below. We inspect the coating, document the crack pattern, and repair only what’s actually failing rather than recoating everything on sight.
- Cast-in-place liner joints and insulation degrading under a loose or missing cap. A cap that’s come loose lets wind-driven snow and debris pack into the flue, and that loading stresses the lining over time. Greeley’s high winds work caps loose faster than most homeowners expect. We clear the flue, check the liner joints and insulation, and reset or replace the cap so the problem doesn’t repeat.
- Spalling or delaminating HeatShield crown repair material over a damp or poorly prepped crown. Heavy spring snowmelt leaves brick crowns saturated, and HeatShield crown material applied over damp or improperly prepped brick doesn’t hold. We check moisture and prep before anything goes on the crown, which is the step that decides whether the repair lasts.
- Flashings sealed with HeatShield sealants pulling away from masonry after high-wind events. When a seal lets go behind the liner top, water finds the entry point and works its way in. We re-bond flashings properly and check the top of the liner while we’re there.
- Narrow flues packed with wind-blown debris and snow after a ground blizzard. This produces smoke backup calls in Greeley even when the fireplace hasn’t been used. Clearing the flue is the fix, and a camera inspection confirms nothing behind the obstruction was damaged.
HeatShield Service in Greeley: What Local Conditions Mean for Your Equipment
The part of Greeley that shapes HeatShield work most is downtown and the older neighborhoods around it, where many pre-1950s homes still run the original brick fireplace with its original clay tile liner. Those liners were never upgraded to a modern cast-in-place system, which means HeatShield relining work on these chimneys is frequently the first liner work the flue has ever had. That changes the order of operations. A Level 2 inspection with a camera scan of the original tile comes first, every time, because nobody can responsibly quote a HeatShield liner or crown product without seeing the condition of what’s underneath. Once that scan is done, we know whether a spot crown repair makes sense or whether the tile is compromised enough that a cast-in-place liner is the honest answer. Neither decision gets made from the ground.
HeatShield Models & Products We Service in Greeley
The HeatShield line we work with includes the cast-in-place insulating liner, a poured refractory liner system; Ceramic Seal coating for crown and flue surfaces; crown repair and resurfacing products; and tuckpointing and repointing mortar systems. Each one behaves differently, and each depends on surface prep to cure and bond the way it’s meant to. We’re an independent HeatShield service provider, not manufacturer-affiliated or authorized. HeatShield systems are proprietary, so lining and crown products need to come from the HeatShield line rather than generic refractory mixes. We source quality parts that fit the system and install them to the prep and cure the product calls for. We don’t claim to be a HeatShield dealer or factory-certified; we’re an independent chimney shop that services and repairs HeatShield installations and handles full relining with HeatShield where the tile is genuinely compromised.
See the difference
Before
After
Before
After
Before
AfterHeatShield Service Pricing in Greeley
HeatShield chimney work is priced per job from a free written estimate, because the range depends heavily on what the inspection finds. A crown repair and resurfacing job sits at one end; a cast-in-place liner on a pre-1950s Greeley flue sits at the other. What drives cost: number of flues, condition of the original clay tile, how much prep the crown or masonry needs, and whether flashings or a cap need rework at the same time. Your free estimate includes a Level 2 inspection so the numbers reflect your chimney, not a phone guess. Nothing gets recommended without camera evidence you can see for yourself, and we’ll say plainly when work can safely wait. Call (855) 632-3564 for an exact quote – estimates are free.
Serving Greeley, CO – Our Local Coverage Area
We serve Greeley and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – HeatShield Chimney Cleaning in Greeley
Because wind-driven snow and debris have packed the cap or flue, and the chimney has no open path for air. Greeley’s ground blizzards push material into caps and flues even on a chimney that’s been sitting cold all winter. In a typical case, a homeowner calls after a storm because smoke backs into the room; inspection often finds the obstruction at the cap, plus a crown coating with freeze-thaw cracking. Clearing the flue and inspecting with a camera confirms nothing behind it was damaged. Call (855) 632-3564 to book an inspection – estimates are free.
Not always, and that’s the point of inspecting first. A Level 2 camera scan shows whether the original tile is intact or compromised. If it’s intact, a crown repair or waterproofing may be all you need. If it’s cracked or deteriorated, a cast-in-place liner is usually the honest fix. We tell you which and show you the footage. Call (855) 632-3564 – estimates are free.
Yes, when it’s applied over a dry, properly prepped crown, and that prep is where it goes wrong. Greeley’s repeated freeze-thaw and heavy spring snowmelt will open hairline cracks in a coating that was applied over damp or poorly prepped brick. We check moisture and prep before applying. Call (855) 632-3564 for a crown evaluation – estimates are free.
They work caps loose and pull flashing sealants away from the masonry, which opens a water entry point behind the liner top. A loose cap also lets debris and snow pack the flue. Inspecting the cap and flashings after wind events catches it before the lining is stressed. Call (855) 632-3564 to schedule – estimates are free.
Usually not. HeatShield is for masonry flues and crowns. Prefab metal fireplaces need different cleaning and inspection methods, and we service those too, but a HeatShield liner or crown product isn’t the answer for a prefab chase. We’ll tell you which type you have. Call (855) 632-3564 – estimates are free.
Service Areas Near Greeley
We serve Greeley and the surrounding communities, including Fort Collins, Longmont, Dacono, Lochbuie, and Erie. Same clay-tile and ground-blizzard conditions apply across most of these towns.
Book Your HeatShield Service in Greeley Today
Ready for a straight answer on your chimney? Call (855) 632-3564 for a free estimate on HeatShield inspection, crown repair, or liner work in Greeley. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. We’ll inspect, show you the camera footage, and quote the work that’s actually needed.
Written by the team at Chimney Sweep Greeley.