Chimney Repair in Greeley - You See the Footage Before You Get a Price

Trusted Chimney Repair for Greeley Homeowners

A cracked crown, a rusted cap, or flashing that’s pulled away from the masonry lets water and cold air straight into the structure of your chimney. Left alone through a northern Colorado winter, that small opening turns into spalling brick, a stained ceiling, and a flue that no longer drafts the way it should. That’s the problem we solve.

Call (855) 632-3564

Our technicians have up to 13 years of experience, and every one of them works in chimneys only, not split across unrelated home trades. We inspect first, show you what we found, and repair only what the evidence supports. Same-day visits are often available in Greeley. Call (855) 632-3564 to book one. Estimates are free, and the written estimate sets the final price.

We work with professional-grade materials from brands technicians trust, including Olympia Chimney and DuraFlex, so a repair holds up to freeze-thaw cycles instead of failing again next spring.

Chimney Cap Installation

Chimney Cap Installation means fitting a protective cover over the flue opening so rain, snow, birds, and debris stay out while smoke and gases still vent freely. If your flue is open to the sky, or you’ve found nesting material or water stains on the smoke chamber, a cap is the simplest protection available. We measure the flue, match the cap to the type of appliance you burn, and set it so it holds through high wind. Most installs run $150 to $450 depending on the size and material. A Famco cap in stainless steel is a common choice for wood-burning flues.

Choosing the Right Cap for Your Flue

Single-flue clay tile, metal multi-flue tops, and factory-built chimneys each take a different mounting style. We look at the flue count, the appliance, and the draft before we recommend one. A cap that’s too restrictive in a gas appliance can cause problems, so the match matters more than the look.

Why Caps Matter Through Freeze and Thaw

Water getting in above the damper is behind much of the masonry damage we see around Greeley. A cap keeps the bulk of it out. It’s also the cheapest thing you can do to protect an otherwise sound chimney.

Chimney Cap Replacement

Chimney Cap Replacement is the swap of a cap that’s failed, rusted through, or been bent by wind or hail. Caps wear out, and a loose one can rattle, let water past the edges, or blow off entirely and leave the flue wide open. We remove the old unit, check the flue tile and the top of the chase for damage underneath, and fit a new cap sized to the opening. Replacement typically runs $175 to $500, and we’ll tell you plainly if the old cap can be repaired instead. Gelco and Olympia Chimney caps are among the products we use.

Spotting a Cap That Has Failed

Rust streaks down the masonry, a cap sitting crooked, or screen mesh torn loose are the usual clues. Look up from the yard after a storm. If something’s shifted, it’s worth a look from the top.

Repair or Replace

Sometimes a bent corner or a torn screen is all that’s wrong, and tightening or re-screening solves it. When the metal itself is corroded through, replacement is the better spend. We’ll tell you which case you’re in before any work starts.

Chimney Liner Installation

Chimney Liner Installation means putting a proper flue lining inside the chimney to contain heat and vent combustion gases safely. A home needs one when the clay tile is cracked, when the existing flue is the wrong size for a new insert or appliance, or when a previously unlined chimney is being returned to service. We handle both flexible and rigid systems, including DuraFlex and Copperfield, and match the liner to your appliance and chimney type. Installation usually runs $1,800 to $4,500 depending on height, liner type, and whether insulation is added. A camera inspection comes first so you can see the condition of the flue yourself.

Flexible Versus Rigid Liners

Flexible liners work well where the chimney has offsets or an irregular path. Rigid sections suit a straight flue and hold their shape over a long run. Neither is universal, which is why we don’t force one product on every house.

Restorative Repair Before Relining

Some flues don’t need a full liner. HeatShield resurfacing can restore certain damaged liners from the inside, which avoids a larger installation. We’ll say honestly when that route is open to you and when it isn’t.

Chimney Flashing Repair

Chimney Flashing Repair addresses the metal that seals the joint where the chimney meets the roof, which is one of the most common places a chimney leaks. Flashing pulls loose as a house settles and as sealant ages, and that gap lets water run down into the attic and framing. We reset or replace the flashing, rework the counter-flashing into the masonry, and seal the edges so rain sheds away from the chimney rather than behind it. Flashing work typically runs $250 to $700 depending on roof pitch, access, and how much of the flashing needs replacing.

Common Sources of Chimney Leaks

Water on the ceiling near the chimney, damp stains on the firebox, or rust on the damper often trace back to the flashing. We check it along with the crown before blaming the masonry. Finding the real entry point saves you from paying for work you don’t need.

Working Around Roof Pitch and Access

Steep roofs and tight clearances make flashing work slow and careful work. We plan the access and the safety setup before anyone goes up. It’s not a job to rush.

Chimney Crown Repair

Chimney Crown Repair fixes the concrete top that caps the chimney and sheds water away from the flue and masonry. When the crown cracks or pulls away from the flue tile, water gets into the core of the chimney and freeze-thaw cycles split the brick from the inside out. We pour or rebuild the crown with a proper slope and overhang so it sheds correctly, and we work the flue tile joint so it stays sealed. Crown repair usually runs $300 to $900 depending on size and whether the whole crown is being rebuilt.

Signs of a Failing Crown

Hairline cracks that have widened, a crown that’s crumbled at the edges, or a rust stain on the firebox floor are signs worth attention. Small cracks get bigger through winter. Catching them early keeps the repair small.

Why the Overhang Matters

A crown that doesn’t overhang the brick lets runoff run down the face of the chimney. Over time that saturates the masonry. A correctly shaped crown is what keeps the whole structure drier.

Chimney Repair Companies

Chimney Repair Companies vary a lot in what they actually do, and choosing one matters more than choosing the lowest number on a quote. The right company works in the chimney trade specifically and can take you from inspection through repair without handing you off to a general contractor. We’re a full-service chimney company: inspection, cleaning, and repair all handled by the same specialists. Repairs based on a camera inspection typically run $200 to $900, with larger relining and rebuild work quoted separately. You get a written estimate before any work starts.

What to Ask Before You Hire

Ask whether they specialize in chimneys only, what they’ll show you as evidence of the problem, and whether the price is written before work begins. Our technicians are licensed and insured. A specialist who can explain the diagnosis clearly is usually the one to hire.

Avoiding Work You Don’t Need

Be wary of a quote for thousands of dollars of liner or masonry work with nothing to back it up. We show camera footage and photos so you can see the flue for yourself. Sometimes the honest answer is that the work can safely wait.

Chimney Masonry Repair

Chimney Masonry Repair restores the brick and mortar that make up the chimney structure when spalling brick, failing joints, or water damage have taken a toll. Lone tree exposure to sun, wind, and hard freezes works mortar joints loose over the years, and once water soaks in, brick faces begin to flake. We repoint deteriorated joints, replace spalled brick, and correct water entry so the masonry stays sound. Masonry repair typically runs $400 to $1,500 or more depending on how much of the chimney is affected and how high the work goes.

Repointing Worn Mortar Joints

Mortar is meant to be the softer part of the masonry, so it wears first and can be renewed. Repointing with a compatible mix restores the joint and keeps water from sitting where it shouldn’t. Doing it before the brick is damaged is the cheaper path.

Spalling Brick and Water Damage

When a brick face pops off, water has gotten in and frozen. Replacing those units and stopping the water source together is what makes the repair last. Treating the symptom alone just resets the clock.

Brands We Service

We work with Olympia Chimney systems for venting and liner components, and we know where they wear and how they fit across the range of chimney types. When a liner or cap needs service, matching the right component matters, and Olympia Chimney products give us solid options.

DuraFlex flexible liner systems are a frequent choice for retrofits and replacements, and knowing the brand well means we install it correctly. We also supply and install products from Gelco and Famco for caps and covers. Whether you have Olympia Chimney or any other make, we can help.

If you want a broader check on the flue before repairs, the team behind our Chimney Sweep Greeley work handles cleaning and inspection with the same materials. Repair and relining projects often start there. It’s a useful place to begin if you’re unsure what’s wrong inside your flue.

Signs You Need a Pro Right Now

• Water stains on the ceiling or firebox: Dampness near the chimney usually points to flashing, a crown, or a cap that’s let water in. Left alone, water damages framing and masonry over a winter.
• Crumbling mortar or flaking brick: Spalling brick means water has gotten in and frozen. Repointing early keeps a small repair from turning into a rebuild.
• A cracked or missing cap: An open flue lets rain, birds, and debris straight into the chimney. A cap is a small fix that protects the whole structure.
• Rust on the damper or firebox: Rust inside the firebox is a sign moisture is getting in from above. It’s worth finding the source before it spreads.
• Strong odors or poor draft: Smoke that won’t draw or a smell in the room can trace to a damaged flue. A camera inspection tells you what’s actually happening.

Our Process, Step by Step

1. 1
   Book the visit. Call (855) 632-3564 and we’ll set a time. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday. A call outside those hours is booked into the next opening.
2. 2
   Inspect with a camera. We inspect the flue, crown, cap, flashing, and accessible masonry. Camera footage and photos let you see the condition of the flue for yourself. Nothing gets recommended without that evidence.
3. 3
   Sweep and clear the hazard. If there’s creosote or debris built up, we clear it before any repair work. A clean flue is what the repair relies on.
4. 4
   Write the estimate. We put the findings and the recommended work in writing, with the price set per job. You’ll see what’s urgent, what’s optional, and what can safely wait.
5. 5
   Complete the repair. The same specialists who diagnosed the problem do the repair, from cap and flashing to crown and liner work. That keeps one team accountable from inspection to finish.

How Much Does Chimney Repair Cost in Greeley?

Our Service Area Near Greeley

From Greeley we serve homeowners across the surrounding towns, including Fort Collins, Longmont, Dacono, Lochbuie, Erie, Niwot, Todd Creek, Brighton, and Gunbarrel. Response times depend on distance and the season, and we’ll give you a clear window when you book. If you’re further out toward our chimney repair coverage, we can still get you scheduled. Roof and chimney work depends on weather, so we plan around safe conditions.

Frequently Asked Questions About Chimney Repair in Greeley

Schedule Your Chimney Repair Service in Greeley Today

If your cap is loose, your crown is cracked, or you’ve spotted water where it shouldn’t be, it’s worth a look before the next hard freeze. Call (855) 632-3564 to book a visit. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday. You’ll get a camera inspection, a written price, and a free, no-obligation estimate, with the same specialists handling the repair from start to finish.

Written by the team at Chimney Sweep Greeley.