Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
HeatShield Chimney Cleaning in Todd Creek, CO
We provide independent HeatShield service across Todd Creek, from creosote removal and inspection through liner resurfacing and repair. What makes our HeatShield work different here is the pairing: we treat a new CeCure or resurfaced flue as only half the job, because Todd Creek’s freeze-thaw cycles will undo a coating that isn’t protected by waterproofing and a sound crown. Our technicians have up to 13 years of experience, and we work in chimneys only – it’s all we do. Call (855) 632-3564 for a free estimate.
Why Todd Creek Residents Choose Us for HeatShield Service
Todd Creek homeowners tend to ask sharper questions than the average caller. That suits us. HeatShield is a flue resurfacing and relining system, and it only performs when the masonry underneath it is clean, dry and structurally able to hold it. We’ve built our work around that reality rather than around a sales pitch.
We’re an independent HeatShield service provider, not the manufacturer and not an authorized dealer. That distinction matters: we diagnose first, then recommend HeatShield systems like the CeCure Sleeve Relining System, Resurfacing Compound, Joint Repair System or CrownSeal only when your flue is a genuine candidate. When a full reline makes more sense, we say so and install a DuraFlex or Copperfield liner instead.
Scheduling is straightforward. A sweep or inspection is booked, we show up when we said we would, and the written estimate sets the final price before any work begins. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Common HeatShield Chimney Cleaning Problems We Solve in Todd Creek
These are the failure modes we run into most often on Todd Creek chimneys, and each one has a local cause behind it.
- CeCure liner separation or cracking at the joints. Todd Creek’s exposed lots take rapid temperature swings and hard freeze-thaw movement, and a sleeved liner flexes with that cycling. When the joints open, draft suffers and creosote finds a place to collect.
- Resurfacing compound spalling or flaking. Compound applied over poorly cleaned or damp masonry lets go, and that’s a particular risk in homes burning heavy pine that lays down creosote fast. Preparation is where a resurfacing job succeeds or fails.
- Joint repair mortar deteriorating. Wind-driven moisture and snow entering through a damaged cap work at the joints through the long heating season. Loose mortar means the flue is no longer gas-tight.
- CrownSeal coating cracking or delaminating. If the crown itself has structural cracks that were never repaired, a coating laid over it will crack too. Hail and thermal shock on Todd Creek’s custom homes speed that up.
- Cracked or loosened caps and crowns. Summer hail and winter wind storms regularly loosen caps on exposed lots here. A compromised cap is the entry point for everything listed above.
HeatShield Service in Todd Creek: What Local Conditions Mean for Your Equipment
Here’s the local detail that shapes almost every HeatShield job we look at in Todd Creek. The dry, windy climate and constant freeze-thaw cycles cause exterior masonry chimneys to develop hairline cracks that let water in. That water freezes, expands, and spalls the brick from the inside out. So resurfacing a flue without protecting the chimney shell is a temporary fix. Any HeatShield Resurfacing Compound or CeCure work we recommend in Todd Creek is paired with waterproofing and a crown inspection, because a new coating that sits on unprotected masonry can fail within a single season. On the larger custom homes off the horse properties north of Denver, where chimneys are tall, exterior and fully exposed to Front Range wind, that combination of repair plus waterproofing is what actually holds. Skip it and you’ll be paying for the same work twice.
HeatShield Models & Products We Service in Todd Creek
We work with the HeatShield systems that come up most in Todd Creek homes: the CeCure Sleeve Relining System for deteriorated flue tiles, Resurfacing Compound for spalled or cracked masonry, the Joint Repair System for failing mortar joints, and CrownSeal for crown protection. Each addresses a different layer of the flue, and choosing between them depends on what the camera inspection shows.
For HeatShield liner and resurfacing work we use HeatShield OEM materials, because compatibility with the system is what determines how long the repair lasts. For standard masonry items like mortar and caps, quality aftermarket parts are fine and often the better value. We don’t claim HeatShield authorization. We’re an independent shop that knows the system and installs it correctly.
See the difference
Before
After
Before
After
Before
AfterHeatShield Service Pricing in Todd Creek
A written estimate sets the final price for every HeatShield job in Todd Creek, and the estimate is free. What drives the cost is access to the flue, how much creosote has to come out before any coating can go down, the length and condition of the flue, and whether crown or masonry repair is needed before resurfacing can hold. A chimney with a cracked crown usually costs more, because the crown has to be dealt with first.
Our technicians have up to 13 years of experience, and we’ll tell you plainly when work can safely wait until next season and when it shouldn’t. Nothing gets recommended without camera evidence you can see for yourself. Call (855) 632-3564 for an exact quote – estimates are free.
Serving Todd Creek, CO – Our Local Coverage Area
We serve Todd Creek and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – HeatShield Chimney Cleaning in Todd Creek
Yes, and it performs well here when it’s installed over clean, dry, structurally sound masonry and protected with waterproofing and a sound crown. The system itself handles cold fine; it’s unprotected masonry around it that fails. We inspect before recommending anything.
Annual sweeping is the baseline for pine burners, and many Todd Creek homes that rely on wood as a primary heat source should be checked more often. Pine builds creosote faster than hardwood, and dry Front Range air makes that creosote more combustible. Call (855) 632-3564 to book a sweep.
Not safely, no. A damaged crown lets water into the flue, and a liner installed under those conditions will fail early. We repair the crown first, then resurface or line. That order isn’t negotiable.
CeCure is a sleeve relining system for flues with deteriorated tiles, while resurfacing compound is applied to the flue wall to restore a smooth, sealed surface. Which one fits your chimney depends on how much of the original tile is intact. The camera inspection decides it.
Many Colorado insurers and buyers ask for a Level 2 inspection during a sale, and it’s the right call regardless of what any policy states. It gives you camera documentation of the flue before anyone signs. Call (855) 632-3564 – estimates are free.
Service Areas Near Todd Creek
We serve Todd Creek and the surrounding communities, including Brighton, Dacono, Lochbuie, Erie and Longmont. If you’re just outside those lines, call and we’ll tell you whether we cover your address. You can also read more about our Todd Creek service.
Book Your HeatShield Service in Todd Creek Today
Whether you need a sweep, a camera inspection, or HeatShield resurfacing and liner work, we’ll give you a free written estimate and a straight answer about what your flue actually needs. Call (855) 632-3564. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday. Learn more about our HeatShield capabilities.
Written by the team at Chimney Sweep Greeley.