Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Fast, Reliable Chimney Repair Across Erie
If your cap peeled back in a windstorm or your wood stove is loading up with creosote faster than it used to, we handle chimney repair in Erie from the diagnostic inspection through the fix. Erie sits on the open plains east of the foothills, and the wind and hail that come with that location do real damage to the prefab chimneys in this town. We work in chimneys only, so the technician at your door spends every day on flues, caps, crowns and liners. Call (855) 632-3564 for a free estimate. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday.
Why Erie Homeowners Call Chimney Sweep Greeley for Chimney Repair
Erie is a fast-growth Boulder County suburb, and much of it went up in tight waves during the 2000s and 2010s. That timing matters for repair work. Whole blocks of homes in Vista Ridge and Erie Highlands hit their first real inspection window around the same time, and the builder-grade components on those units are showing their age together.
When you call, we ask what kind of chimney you have and what changed, then book the job. The whole loop stays with us: inspection finds the problem, the sweep clears the hazard, repair resolves the root cause. No handoffs to a third party who has never seen the inside of your flue. Our technicians have up to 13 years of experience and work in the chimney trade only.
We’re licensed and insured, and our estimates are free. Nothing gets recommended without camera evidence you can look at yourself, and we’ll tell you plainly when a repair can safely wait. If you’re in Erie, that’s the difference between a real diagnosis and a sales pitch.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Chimney Liner Installation in Erie
Chimney liner installation in Erie usually comes up on prefab units where the original metal liner has rusted through or cracked at a joint, or on an older masonry stack near downtown where a clay tile has spalled. Either way, the liner is what carries smoke and flue gases out of the house, so a compromised liner isn’t something to sit on.
We install DuraFlex flexible liner systems for retrofits and replacements, plus rigid options where the flue allows. The right liner depends on your chimney type and appliance, not a one-size solution. A typical liner job in Erie runs $2,200 – $4,800, with the written estimate setting the final price.
Flexible Liner Retrofits
Flexible liners work well in prefab chases and in masonry flues with offsets that a rigid pipe can’t navigate. We size the liner to the appliance and confirm the flue joints and damper still seal once it’s in.
Rigid and Prefab Replacement
When a prefab flue section has failed, replacing the damaged run is usually cleaner than trying to patch it. We check the rest of the assembly at the same time so you’re not back on the phone a season later.
Chimney Flashing Repair in Erie
Chimney flashing repair in Erie is one of the most common calls we get, because flashing is the first thing to fail when wind and hail work on a roof through Front Range weather. On the windy open plains just east of the foothills, chinook gusts and hail pry at the metal where the chimney meets the roof, and once that seal opens, water finds its way into the chase.
Flashing repair means resetting the counterflashing and step flashing, sealing the joints, and checking that the chase cover and cap aren’t already letting water in from above. A typical flashing job in Erie runs $350 – $900 depending on the roof pitch and how much of the seal has to be rebuilt.
Wind and Hail Damage
Builder-grade flashing takes a beating on exposed Erie roofs. We look for lifted edges, dented metal and failed sealant before the first hard freeze sets the leak in place.
Water Intrusion at the Chase
Water that gets past the flashing often shows up as a rusted liner or a stained ceiling rather than an obvious leak. We trace it back to the source with a camera before recommending anything.
Trusted Brands We Service in Erie
We install and service products from a vetted set of chimney brands: DuraFlex, HeatShield, Copperfield, Olympia Chimney, Famco and Gelco. What that means for an Erie homeowner is access to commercial-grade liner, sealant and venting solutions rather than whatever a generalist keeps on hand. We don’t claim a partnership or factory-authorized status with any of them. We source the right part for your chimney type and get the repair scheduled without a long wait. From cap and cover work with Famco and Gelco to liner systems from DuraFlex and Copperfield, the materials are ones chimney technicians trust.
Common Chimney Repair Problems We See in Erie Homes
- Wind-driven cap and chase-cover damage. Builder-grade caps on Erie’s prefab units are frequent casualties of plains windstorms, and once one peels back, water gets into the firebox and liner.
- Heavy creosote from wood stoves used as primary heat. Rural properties around Erie that lean on a wood stove all winter build glaze faster than city homes, which shortens the safe sweeping interval.
- Cracked and spalling crowns on older ranch homes. The masonry chimneys near downtown Erie need repointing and crown repair rather than prefab part swaps, since they were built with real brick.
- Rusted flue liners behind water intrusion. A flashing leak that goes unnoticed for a season can rust a metal liner from the inside, which turns a small repair into a full reline.
Pricing for Chimney Repair in Erie, CO
Chimney repair in Erie isn’t one price, because the work ranges from a re-secured cap to a full liner job. Here’s what the common repairs typically run in this market:
- Cap and chase-cover repair or replacement: $250 – $700
- Flashing repair: $350 – $900
- Mortar repointing and tuckpointing: $600 – $1,800
- Crown repair or rebuild: $500 – $1,400
- Liner installation: $2,200 – $4,800
- Partial chimney rebuild: $2,500 – $6,000
Those ranges are estimates for Erie’s market, and the written estimate sets the final price. Nothing is recommended without camera evidence you can see, and we’ll say when a repair can wait. Call (855) 632-3564 for a free estimate.
See the difference
Before
After
Before
After
Before
AfterWe Also Serve Cities Near Erie
Erie sits between several Front Range towns, and we serve the ones nearby as well. If you’re just outside Erie in Niwot, Longmont, Dacono or Gunbarrel, the same inspection, sweep and repair process applies. Reach out and we’ll book the job. You can also read more about our chimney repair services, or see everything we offer in Erie.
Serving Erie, CO – Our Local Coverage Area
We serve Erie and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs About Chimney Repair in Erie
A wood stove used as primary heat in rural Erie should typically be swept once a year, and sometimes twice if you burn hard through the cold months. Stoves that run all winter build creosote faster than a fireplace used a few evenings a week, so the safe interval shortens. Call (855) 632-3564 for an exact quote – estimates are free.
Prefab chimney caps in Erie fail often because the open plains east of the foothills funnel chinook gusts and hail straight at builder-grade caps that were never rated for that exposure. The cap peels or dents, water gets into the chase, and the liner starts to rust. Call (855) 632-3564 for an exact quote – estimates are free.
Yes, an older masonry chimney near downtown Erie can often be relined with a cast-in-place system, and HeatShield work is a restorative option that’s less invasive than a full reline. It’s only right when the flue condition supports it, which the camera inspection confirms. Call (855) 632-3564 for an exact quote – estimates are free.
First-degree creosote is a light, flaky soot that a standard sweep removes; third-degree is a hardened glaze that has baked onto the flue and takes more work to clear. It matters in Erie because rural wood stoves running all winter reach glaze faster, and glaze is the fuel behind a chimney fire. Call (855) 632-3564 for an exact quote – estimates are free.
Yes, gas inserts in Erie homes need chimney repair when the liner, cap or chase cover has failed, and gas venting has its own requirements a wood flue doesn’t meet. A worn cap and water intrusion will damage a gas vent liner just as fast as a wood one. Call (855) 632-3564 for an exact quote – estimates are free.
What Usually Happens on a Repair Call in Erie
Most repair calls in Erie’s newer tract homes involve a builder-grade cap or chase cover that a chinook gust or hail has peeled back or dented, letting water into the prefab firebox and flue liner. A qualified local pro inspects the cap, flashing and chase cover, then re-secures or replaces the damaged parts with wind-rated components and checks that the prefab flue joints and damper still seal correctly. On the rural properties around Erie, the first visit is usually a sweep and inspection, because a wood stove carrying the heating load builds creosote that has to clear before any repair makes sense. Downtown ranch homes with real masonry get a different look: crown cracks, spalled brick and joints that need repointing before winter water gets in.
What Makes Erie Different From Older Front Range Towns
Erie’s post-2000 subdivisions like Vista Ridge and Erie Highlands are dominated by factory-built metal fireplaces with direct-vent or B-vent flues, not masonry chimneys. That shifts repair work here toward prefab chase-cover and cap damage from plains windstorms rather than tuckpointing brick stacks. In older Front Range towns the masonry is the maintenance story; in Erie it’s the wind-hardware story. The smaller stock of older ranch homes near downtown Erie still has traditional masonry, and those need different sweep methods and repointing than the subdivisions do. Because so many Erie subdivisions were platted in tight waves, whole blocks of prefab fireplaces reach their first-decade inspection window together, and builder-grade caps on those units are frequent casualties of the wind. Knowing which stock you’re in tells us what to check before we arrive.
Cutting Creosote on Rural Erie Properties
The properties around Erie that heat primarily with wood load the flue far harder than a suburban fireplace does, and third-degree glaze can build in a single heating season without careful burning. Burning dry, seasoned wood instead of green or damp wood is the single biggest thing you can do to slow buildup. Don’t damper a fire down to a slow smolder for long stretches; that low, cool burn is what deposits glaze. Spread the heat load with a gas insert or furnace where you can, and keep the stove from running choked overnight. A sweep before the season is what tells you where you stand. Call (855) 632-3564 for a free estimate. We answer 24/7, and fast dispatch from 7am to 7pm, Sunday through Friday.
Written by the team at Chimney Sweep Greeley.